Date/Timer; Optional Memory - Utax 256i User Manual

Setup, Registration, and User Management > System Menu

Optional Memory

Item
Optional Memory
* After changing the setting, restart the system or turn the machine OFF and then ON.

Date/Timer

Configures settings related to the date and time.
Item
Date/Time
Date Format
Time Zone
Auto Panel Reset
Panel Reset Timer
Low Power Timer
Auto Sleep
When optional memory is installed, select the memory allocation scheme based on the
application in which you are using the equipment.*
Value: Printer Priority, Normal, Copy Priority
Set the date and time for the location where you use the machine. If you perform Send as E-
mail, the date and time set here will be displayed on the header.
Value: Year (2000 to 2037), Month (1 to 12), Day (1 to 31), Hour (00 to 23), Minute (00 to 59),
Second (00 to 59)
Select the display format of year, month, and date. The year is displayed in Western notation.
Value: Month/Day/Year, Day/Month/Year, Year/Month/Day
Set the time difference from GMT. Choose the nearest listed location from the list.
If no jobs are run for a certain period of time, automatically reset settings and return to the
default setting. Select to use Auto Panel Reset or not.
Value: Off, On
NOTE: The time allowed to elapse before the panel is reset is set with the Panel Reset
Timer.
If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel Reset.
Value: 5 to 495 seconds (every five seconds)
NOTE: If you select [Off] for [Auto Panel Reset], the time display does not appear.
Set amount of time before entering the Low Power mode.
Value: 1 to 240 minutes (1 minute increments).
Set Auto Sleep to automatically enter Sleep Mode after a period of inactivity.
Value: Off, On
NOTE: Refer to Sleep and Auto Sleep on page 2-23 for Sleep.
The time allowed to elapse until the auto sleep function is activated is set with the Sleep
Timer.
9-24
Description
Description