Sending > Scanning using TWAIN
Scanning using TWAIN
This section explains how to scan an original using TWAIN.
The procedure for scanning using the TWAIN driver is explained as an example. The WIA driver is used in the same
way.
1
2
Display the window.
1
Activate the TWAIN compatible application software.
2
Select the machine using the application software and display the TWAIN dialog box.
NOTE
For selecting the machine, see the Operation Guide or Help for each application software.
Configure the function.
Select scanning settings in the TWAIN dialog box that opens.
The settings that appear in the TWAIN dialog box are as follows.
Item
Basic
Original Size
Feed Method
Original Orientation
Sending Size
This setting sets the size of the scan area.
This setting specifies the feed method of the original.
Select the feed method from the list.
This setting specifies the orientation of the original.
This setting specifies the image size.
6-48
Detail