Paging Other System Users; Enabling Or Disabling The Page Feature - Mitel 8500 Endpoint User Manual

Paging Other System Users

You can place page announcements through endpoint speakers or external speakers (if
applicable). Your system may use page zones to prevent announcements from transmitting
through every endpoint in the system. Each page zone contains a different combination of
extensions and external paging equipment.
Contact your system administrator for page zone information. You can use the following table to
save the page zone information for future reference.
Placing a Page Announcement
To place a page announcement:
1. Press the PAGE button.
2. Enter the page-zone number (0 to 9).
3. After the tone, make your announcement, and then hang up.

Enabling or Disabling the Page Feature

You can enable or disable the Page feature for your extension. If your extension is assigned to
more than one page zone, the Page on and off feature code enables or disables your extension
for all pages zone (you cannot select individual zones).
To enable or disable paging for your endpoint:
Mitel ® Model 8500 User Guide – Issue 12, October 2008
Page Zone Name
Dial 325 (on/off toggle).
Number
Messages
Description
Page 33