Adding A Conference Party; Transferring A Conference; Dropping Out Of A Conference; Ending A Conference And Placing All Parties On Hold - Mitel 8500 Endpoint User Manual

Adding a Conference Party

You can add a conference party during the conference.
To add a conference party:
1. Press the CNF button. This leaves the conference parties connected.
2. Place a call to the party to be added to the conference, and then announce the

Transferring a Conference

You can transfer an existing conference to another extension.
To transfer a conference:
1. During the conference, press the TRANSFER button, and then dial the extension
2. Announce the conference (if desired), and then hang up. The party must then press the

Dropping Out of a Conference

You can drop out of a conference and return to the conference later.
To drop out of a conference:
To return to the conference:

Ending a Conference and Placing all Parties on Hold

You can end a conference and place all conference parties on Individual Hold, allowing you to
toggle between the held parties and speak to one party at a time.
To end a conference and place all parties on Individual Hold:
To toggle between the held callers:
Mitel ® Model 8500 User Guide – Issue 12, October 2008
conference. Press the CNF button twice to add the party and rejoin the conference.
number.
flashing CNF button to connect to the conference.
Press the CNF button or
conference but leaves the other parties connected.
Press the flashing CALL button, and you are reconnected to the conference.
Press the CNF button, and then press
Press (Hold) twice for internal parties or the flashing CALL button for external parties.
(Hold), and then hang up. This removes you from the
(Hold).
Call Features
Page 23