Related Manuals for Lincoln Electric INVERTEC 160SX
Summary of Contents for Lincoln Electric INVERTEC 160SX
- Page 1 IM2038 12/2014 rev05 ® INVERTEC 160SX PŘÍRUČKA UŽIVATELE (OPERATOR’S MANUAL IN ENGLISH) ENGLISH Lincoln Electric Bester Sp. z o.o. ul. Jana III Sobieskiego 19A, 58-263 Bielawa, Poland www.lincolnelectric.eu...
-
Page 2: Declaration Of Conformity
2006/95/CEE, 2004/108/CEE and has been designed in compliance with the following standards: EN 60974-1, EN 60974-10:2007 09.09.2014 Paweł Lipiński Operations Director Lincoln Electric Bester Sp. z o.o., ul. Jana III Sobieskiego 19A, 58-263 Bielawa, Poland 12/05 English English... -
Page 3: Table Of Contents
12/05 THANKS! For having chosen the QUALITY of the Lincoln Electric products. Please Examine Package and Equipment for Damage. Claims for material damaged in shipment must be notified immediately to the dealer. For future reference record in the table below your equipment identification information. Model Name, Code & Serial Number can be found on the machine rating plate. -
Page 4: Safety
Failure to follow the instructions in this manual could cause serious personal injury, loss of life, or damage to this equipment. Read and understand the following explanations of the warning symbols. Lincoln Electric is not responsible for damages caused by improper installation, improper care or abnormal operation. -
Page 5: Installation And Operator Instructions
WELDING SPARKS CAN CAUSE FIRE OR EXPLOSION: Remove fire hazards from the welding area and have a fire extinguisher readily available. Welding sparks and hot materials from the welding process can easily go through small cracks and openings to adjacent areas. Do not weld on any tanks, drums, containers, or material until the proper steps have been taken to insure that no flammable or toxic vapors will be present. -
Page 6: Output Connections
Output Connections Arc Force A quick disconnect system using Twist-MateTM cable Auto Adaptive Arc Force (with MMA welding) plugs is used for the welding cable connections. Refer to During MMA welding is activated the function Auto the following sections for more information on Adaptive Arc Force that increases temporary the output connecting the machine for operation of stick welding current, used to clear intermittent connections between... - Page 7 Please contact the nearest welding. technical service center or Lincoln Electric and report the 3-digit code displayed on the meter of the Front Panel. Power ON/OFF LED: This LED lights up when the machine is ON.
- Page 8 WARNING For any repair operations, modifications or maintenances, it is recommended to contact the nearest Technical Service Center or Lincoln Electric. Repairs and modifications performed by unauthorized service or personnel will cause, that the manufacturer’s warranty will become null and void.
-
Page 9: Electromagnetic Compatibility (Emc)
Electromagnetic Compatibility (EMC) 11/04 This machine has been designed in accordance with all relevant directives and standards. However, it may still generate electromagnetic disturbances that can affect other systems like telecommunications (telephone, radio, and television) or other safety systems. These disturbances can cause safety problems in the affected systems. Read and understand this section to eliminate or reduce the amount of electromagnetic disturbance generated by this machine.. -
Page 10: Technical Specifications
Technical Specifications NAME INDEX ® INVERTEC 160SX CE K12050-1 ® INVERTEC 160SX AUS K12050-2 INPUT EMC Group / Input Voltage Range Input Power at Rated Output Class Frequency from 115 to 230Vac ±15% (CE model) 50/60Hz 3.07kVA @ 100% Duty Cycle 240Vac ±15% (AUS model) II / A 5.17kVA @... -
Page 11: Weee
12/05 Part list reading instructions Do not use this part list for a machine if its code number is not listed. Contact the Lincoln Electric Service Department for any code number not listed. Use the illustration of assembly page and the table below to determine where the part is located for your particular code machine.