Related Manuals for Lincoln Electric INVERTEC 165S
Summary of Contents for Lincoln Electric INVERTEC 165S
- Page 1 800036912 02/2018 REV00 ® INVERTEC 165S OPERATOR’S MANUAL ENGLISH Lincoln Electric Bester Sp. z o.o. ul. Jana III Sobieskiego 19A, 58-263 Bielawa, Poland...
-
Page 2: Declaration Of Conformity
2014/35/EU , 2014/30/EU, 2011/65/EU and has been designed in compliance with the following standards: EN 60974-1:2012; EN 60974-10:2014 01.08.2018 Piotr Spytek Operations Director Lincoln Electric Bester Sp. z o.o., ul. Jana III Sobieskiego 19A, 58-263 Bielawa, Poland... - Page 3 Failure to follow the instructions in this manual could cause serious personal injury, loss of life, or damage to this equipment. Read and understand the following explanations of the warning symbols. Lincoln Electric is not responsible for damages caused by improper installation, improper care or abnormal operation.
- Page 4 CE COMPLIANCE: This equipment complies with the European Community Directives. ARTIFICIAL OPTICAL RADIATION: According with the requirements in 2006/25/EC Directive and EN 12198 Standard, the equipment is a category 2. It makes mandatory the adoption of Personal Protective Equipment (PPE) having filter with a protection degree up to a maximum of 15, as required by EN169 Standard.
-
Page 5: Electromagnetic Compatibility (Emc)
Lincoln Electric. This equipment does not comply with IEC 61000-3-12. If it is connected to a public low- voltage system, it is responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the equipment may be connected. - Page 6 CONTENTS TECHNICAL DESCRIPTION ............. 2 DESCRIPTION .
-
Page 7: Technical Description
TECHNICAL DESCRIPTION TECHNICAL DESCRIPTION are designed to compensate power supply variations. For varia- tions of ±10%, a welding current variation of ±0.2% is created. DESCRIPTION The system consists of a modern direct current generator for the B E F O R E I N S E R T I N G T H E M A I N S welding of metals, developed via application of the inverter. -
Page 8: Controls, Position And Functions
CONTROLS, POSITION AND FUNCTIONS HANDLING AND TRANSPORTING THE POWER CHECK GAS DELIVERY; TURN GAS CYLINDER KNOB TO SOURCE REGULATE FLOW . NB: The electric welding arc is struck by lightly touching the work- OPERATOR SAFETY: WELDER’S HELMET - GLOWES - piece with the electrode (Scratch start).