Electrolux Built-in 42" Service Manual page 51

9. Place the fresh food shelf in the top position. Place the
evaporator assembly on the shelf.
Caution: Refrigerant lines may be damaged if the
evaporator assembly is left unsupported.
Fresh Food Evaporator Fan Assembly
To remove the fresh food evaporator fan
assembly:
1. Access the fresh food evaporator assembly.
(See Fresh Food Evaporator Assembly).
2. The fan assembly is attached to the evaporator
assembly with 4 Phillips-head screws (2 on each side
of the fan assembly). Remove the 4 screws that hold
the fan assembly in place.
3. Separate the fan assembly from the evaporator
assembly.
Fresh Food Evaporator
To access the fresh food evaporator:
1. Access the fresh food evaporator assembly.
(See Fresh Food Evaporator Assembly.)
2. Remove the fresh food evaporator fan assembly. (See
Fresh Food Evaporator Fan Assembly.)
3. Remove the tape from the front of the Styrofoam cover.
Note the position of the wires under the tape. The tape
must be replaced after repair.
4. Remove the Styrofoam cover.
WARNING: The evaporator fi ns are very sharp. Wear
Kevlar gloves when handling.
5. Remove the 2 Phillips-head screws that hold the fresh
food evaporator in place (Fig. 1 and Fig. 2)
6. Disconnect the 2 electrical connectors and lift the fresh
food evaporator from the housing.
WARNING: The evaporator fi ns are very sharp. Wear
Kevlar gloves when handling.
51
5995432258