Freezer Evaporator Components - Electrolux Built-in 42" Service Manual

disassembly.
4. Starting at one corner, use a screwdriver and unlock the
6 tabs from the housing cover.
WARNING: The evaporator fi ns are very sharp.Wear
Kevlar gloves when handling.
5. Remove the single Phillips-head screw at the corner of
the evaporator.
6. To access the remaining Phillips-head screw that holds
the evaporator in place, suspend the evaporator from
the machine compartment grille mounting bracket with
a bent wire hook. Remove the screw.
Note: The screw may be covered by foil.
7. Lift the evaporator from the housing.

Freezer Evaporator Components

To access the freezer evaporator components:
1. Access the freezer evaporator assembly. (See Freezer
Evaporator Assembly.)
2. Remove the freezer evaporator fan assembly. (See
Freezer Evaporator Fan Assembly.)
3. Access the freezer evaporator. (See Freezer
Evaporator.)
Defrost Safety Thermostat
To remove the defrost safety thermostat, remove
the single Phillips-head screw from the thermostat
mounting bracket. Separate the thermostat from
the bracket.
Freezer Evaporator Thermistor
To remove the freezer evaporator thermistor, pull it
straight out from its mounting tube.
Defrost Heater
To remove the defrost heater, remove the 2 Phillips-head
screws from the evaporator defrost heater mounting
brackets. Separate the defrost heater from the evaporator.
49
5995432258