Coffee Dispenser; Brewing Unit; Drip Tray And Relative Grid; Grounds Tray - Saeco Modular Coffee Instruction And Maintenance Manual

7.2.1 Coffee dispenser

The following can be dismantled:
- The top cover (ref. A, fig. 12), of the fixed dispenser (ref. F,
fig. 12), by pulling it upwards;
- The rubber gasket (ref. H, fig. 12);
- The mobile dispenser (ref. G, fig. 12) by pulling it
downwards;
- The telescopic dispenser (ref. E, fig. 12), sliding it from the
main dispenser (ref. G, fig. 12), after having pressed on the
hooks (ref. C, fig. 12) of the infernal element (ref. B, fig.
12).
The metal conveyor (ref. D, fig. 1 2) has to be cleaned with a
damp cloth without disconnecting it f r om the fixed dispenser
(ref. F, fig. 12).
Danger of burns
The conveyor (ref. D, fig. 12) is heated by an internal
heating element; before cleaning, wait until it has
completely cooled.

7.2.2 Brewing unit

The unit must be periodically cleaned by using the proper
tablets (see "6.14.2 Functions descriptions - GROUP
RINSING").
- Extract the brewing unit (ref. 6, fig. 1 3) from machine
through the handle provided (ref. A, fig. 13) and pressing
the key marked with "PRESS".
- Carefully wash in plenty of warm water.
Do not use detergents.
Important
Never wash the brewing unit in the dishwasher.
Lightly scratch the top filter (ref. B, fig. 1 3) with a plastic
spoon or a small spatula.

7.2.3 Drip tray and relative grid

Slide the drip tray (ref. 15, fig. 1) out of the machine and wash
in running water with particular attention for the grid.

7.2.4 Grounds tray

Wash the machine grounds tray (ref. 17, fig. 1) in running
water after having removed the drip fray (ref. 15, fig. 1) and
having removed it from its seat.
7.2.5 Steam/hot water spouts
Clean the spouts (ref. 16-11, fig. 1) with a soft damp cloth. n
case of cogging of jets, the end part of the dispensers can be
unscrewed and the jets can be opened again with the help of
a needle.

7.2.6 Cup heating plate

Clean the cup heating plate (ref. 4, fig. 11 with a soft damp
cloth.

7.2.7 Coffee hopper

Wash the coffee hopper (ref. 7, fig. 1) with water, using a soft
damp cloth.
Important
It is advisable to use up all coffee beans before cleaning.
7.3 Jamming
of the coffee grinder unit
Danger
Operation falling within the competence of the
Maintenance technician.
In case of jamming of the grinders, due to the presence of
foreign bodies among the coffee beans, the machine will lock
issuing the message "GRINDER ERROR" on display.
English
(LUXE version)
19