Toyota SP200 Series Instruction Manual page 52

Trouble
Unable to
sew stretch
stitches
The needle
cannot be
threaded with
the needle
threader
If the above treatments do not solve the problem, contact the service center as
described in your warranty.
When calling for service, please note the MODEL and SERIES that are inscribed on the
back of your sewing machine.
52
Cause
The stitch length dial is not
set to setting "A – K" or "L –
S"
The stitch length dial and the
stitch pattern selection dial
settings do not correspond
The needle position is too
low
Needle no. 9/65 is being
used
Needle incorrectly inserted
The needle is bent
Threading of the needle
thread guide incorrect
SP200 SERIES / SERIE MODEL / MODELE
MADE IN P. R. C. / FABRIQUE A P.R.C.
Countermeasure
Set the stitch length dial to the
appropriate setting
Select the same setting on
the stitch length dial and the
pattern selection dial
Turn the handwheel so that the
line is at the top
Use needle sizes 11/75 to
16/100
Insert the needle correctly
Use a straight needle
Rethread the needle thread
guide correctly
Manufacturer/ : ZHEJIANG AISIN ELITE
Fabricant MACHINERY & ELECTRIC
CO., LTD.P.R.C.
Importer/ :
Importateur
Designed and engineered by
AISIN SEIKI JAPAN
Page
23-25
23-25
20
29
28
28
18