Toyota SP200 Series Instruction Manual page 4

Caution
Be sure to close the bobbin case cover before operating the sewing machine.
Not doing so could cause an injury.
When the machine is not in use it should be stored safely, not on the floor
as protruding parts could cause injury if a person fell on the machine.
Not doing so could cause an injury.
Before changing the needle or threading the lower thread or upper thread,
use the main power switch to turn off the sewing machine.
Not doing so could cause an injury.
Do not look away from the needle while operating the sewing machine.
If the needle breaks it could cause an injury.
Do not touch moving parts such as the needle, take-up lever or handwheel.
Doing so could cause an injury.
Do not place your hand or fingers under the needle.
Doing so could cause an injury.
Do not use when young children are near the machine.
Children shall not play with the machine as they could touch the needle and be
injured.
When leaving the sewing machine after using it, use the main power switch
to turn off the sewing machine, and then remove the power plug from the
outlet.
Not doing so could cause an injury.
Before using the sewing machine make sure that the presser foot holder
clamp screw, needle clamp screw and needle plate screw are firmly tightened,
and that the presser foot is properly set in the presser foot holder.
Not doing so could cause an injury.
Do not perform the following actions.
Doing so could cause an injury.
•
•
•
•
•
4
Sewing without lowering the presser foot.
Sewing while the needle is incorrectly installed.
Using a bent needle.
Sewing while jerking the fabric.
Moving the pattern selection dial while sewing.