Toyota SP200 Series Instruction Manual page 43

Position the fabric so that the needle slightly catches the fold.
Zigzag sewing foot
Needle on
the left side
When using the zigzag sewing foot
z
6
Lower the presser foot, and start sewing.
The part of the stitch that catches the fold
will be visible from the right side of the
fabric. Sew evenly so that the stitching is
not too large or too small.
When using the blind stitch foot
z
6
Lower the presser foot, adjust the screw
so that the fold aligns with the guide, and
then sew with the fold against the guide.
7
After sewing, pull out the tacking, and fold out the fabric.
Balanced stitches
„
Small stitches evenly
located on right side.
Wrong Right
side side
(When unfolded)
Fold
Troubleshooting
„
Needle catches too
much on the fold
Wrong Right
side
Large stitches on right side.
Blind stitch foot
Needle on
the left side
Fold
Wrong
side
Guide
Needle does not
catch on the fold
Wrong
side side
The blind hem stitches
do not come through
Fold
3
Adjusting
screw
Fold
Right
side
43