Omron V530-R150E-3 Operation Manual page 201

MON (Monitor) Mode
Types of Displayed Image
Freeze (@) A still image immediately after measurement. The memory number (0 to 23) under
which the image is stored is displayed in @. When reading moving objects, display
freeze images.
Through A live image from the Camera. When a through image is displayed, the number of
the camera from which it was read is also displayed. When reading is performed
on through images, a delay of 33.3 ms max. (depending on timing of command
inputs) will occur before starting to load images.
Camera
run-cycle
Memory @
A reading image stored in the past.
The reading images which are coincident with image storage conditions are stored
in memory 0 to 23.
How to set storage conditions of images.
Image 0 An image after filtering according to the settings in 0. Image Adjust.
Reading is performed on the image after filtering.
Image 1 An edge detection image for Data Matrix processing. (For a scene in which condi-
tions are set for QR Codes, this will be same as the Image 0.)
184
being used, the light will be about 20% dimmer after 1,500 hours
of operation.
Measurement
command
Delay
33.3 ms
Image input
(Image transferred
to V530)
“
page 202
Section 6-2