Flexitimer With Ecostart - Miele G 6500 Operating Instructions Manual

Options

FlexiTimer with EcoStart

The FlexiTimer  gives you three ways
of starting the program by means of de‐
laying the start. You can set the start
time or the finish time of a program.
You also have the option of taking ad‐
vantage of time variable economy rates
of electricity using the
tion.
When using the delay start function,
make sure that the detergent com‐
partment is dry before adding deter‐
gent. Wipe dry with a cloth if neces‐
sary. If the compartment is wet,
powder detergent can become lum‐
py and stick to the dispenser, with
the result that it is not fully dis‐
pensed.
Do not use liquid detergent when se‐
lecting delay start, as it can run into
the dishwasher before it is required.

To prevent children coming into
contact with dishwasher detergent:
Do not fill the detergent dispenser
until just before starting the pro‐
gram, i.e., before you activate the
FlexiTimer with OK. Also activate the
child safety lock.
50
func‐
FlexiTimer
 Switch the dishwasher on with the 
button.
The Start indicator light flashes.
 Select the desired program.
 Press the  button.
You can use the  arrow buttons to
select the
Start at
function or
Back 
 Confirm selection of the function you
want with OK.
The current time of day will appear and
the hour number block will be highlight‐
ed.
You can now enter the time you want
using the  arrow buttons and con‐
firm with OK.
If, while you are setting the time, you do
not press any buttons for several sec‐
onds, the display will revert to the previ‐
ous menu. You will then have to enter
your settings again.
If the time of day (clock) display has
been switched off (see "Settings menu
- Time of day"), the display will go out
after a few minutes and only the Start
indicator light will flash slowly.
Press any button to switch the display
back on again for a few minutes.
, , or
Finish at FlexiTimer
.