Flexitimer With Ecostart - Miele PG 8131i Operating Instructions Manual

FlexiTimer with EcoStart

With the FlexiTimer  you have three
options for starting the programme us-
ing Delay start. The start or finish time
of a programme can be set. You also
have the option of using the
function to benefit from cheaper rate
energy tariffs.
When using the FlexiTimer function,
make sure that the detergent com-
partment is dry before adding deter-
gent. Wipe dry with a cloth if neces-
sary. If the compartment is wet,
powder detergent can become
lumpy and stick to the dispenser,
with the result that it is not fully dis-
pensed.

To prevent children coming into
contact with dishwasher detergent:
Do not fill the detergent dispenser
until just before starting the pro-
gramme, i.e. before you activate the
FlexiTimer with OK and also activate
the door safety lock.
 Switch on the dishwasher with the 
button.
The Start indicator light will flash.
 Select the programme you want.
 Press the  button.
EcoStart
You can use the  arrows to select
the
functions.
 Confirm selection of the function you
want with OK.
The current time of day will appear and
the hour number block will be high-
lighted.
You can now enter the time you want
using the  arrow buttons and con-
firm with OK.
If, while you are setting the time, you do
not press any buttons for several
seconds, the display will revert to the
previous menu. You will then have to
enter your settings again.
If the time of day (clock) display has
been switched off (see "Settings
menu, Time of day") the display will go
out after a few minutes and only the
Start indicator light will flash slowly.
Press any button to switch the display
back on again for a few minutes.
Programme options
Start at , Finish at , EcoStart or Back 
49