Table of Contents
Advertisement
Options
FlexiTimer with EcoStart
The FlexiTimer gives you three ways
of starting the program by means of de-
laying the start. You can set the start
time or the finish time of a program. You
also have the option of taking advan-
tage of time variable economy rates of
electricity using the
When using the delay start function,
make sure that the detergent com-
partment is dry before adding deter-
gent. Wipe dry with a cloth if neces-
sary. If the compartment is wet, pow-
der detergent can become lumpy
and stick to the dispenser, with the
result that it is not fully dispensed.
Do not use liquid detergent when se-
lecting delay start, as it can run into
the dishwasher before it is required.
Open the door.
Switch the dishwasher on with the
button.
Select the desired program.
Press the button.
The indicator light will light up.
You can use the arrow buttons to
select the
Start at
function or
Back
Confirm selection of the function you
want with OK.
The set time will appear and the hour
number block will be highlighted.
You can now enter the time you want
using the arrow buttons and con-
firm with OK.
56
EcoStart
function.
,
Finish at
, or
EcoStart
.
If, while you are setting the time, you do
not press any buttons for several sec-
onds, the display will revert to the previ-
ous menu. You will then have to enter
your settings again.
If you open the door for more than
four seconds before the start time is
reached, the message
appears in the display. Press the OK
button and close the door within four
seconds to restart the FlexiTimer.
Continue with OK
Advertisement
Table of Contents
