Miele G 6500 Operating Instructions Manual page 52

Options
EcoStart
The function allows you to
FlexiTimer
take advantage of time variable econo‐
my rates of electricity. Before you can
use this option, you must set up to
three electricity rate time zones (see
"Settings menu - EcoStart").
You then set the latest time at which the
program selected should end.
The dishwasher will start automatically
in the cheapest rate zone within the
time set.
 Use the  arrow buttons to set the
hour and confirm with OK.
The hour will be saved and the minute
number block will be highlighted.
 Use the  arrow sensors to set the
minutes and confirm with OK.
The estimated start time of the program
selected will appear in the display.
The  and Start indicator lights will
light up.
The program selected will start auto‐
matically in the cheapest time zone and
will finish at the latest at the finish time
set.
The time remaining will appear in the
display, the  indicator light will go out
and the indicator light for the program
selected will light up.
52
Changing or deleting set times
You can change the set times or the
program before the start time in the dis‐
play is reached.
 Press the  button.
 Use the  arrow buttons to select
the setting you want to change and
confirm with OK.
 Use the  arrow buttons to select
the or
Change Delete
confirm with OK.
After confirming the
you can change the set time.
After confirming the
program duration will appear in the dis‐
play and the program will start.
The  indicator light will go out and the
Start indicator light will light up.
If you open and close the door again
before the start time is reached, the
message
Continue with Start
in the display. Press the Start button
to restart the FlexiTimer.
function and
function,
Change
function, the
Delete
will appear