Changing The Gear Oil; Changing The Seat Hight - KTM 2001 50 MINI ADVENTURE Owner's Handbook Manual

1
3
2
25 mm
Changing gear oil *
The engine must be warmed up before changing the gear oil. Park the
motorcycle on a horizontal surface, remove the oil drain plug
the used oil into an appropriate container. Clean the sealing surface, mount
the oil drain plug together with the gasket and tighten with 15 Nm (11 ft.lb).
Lay the motorcycle on its side and add 0.25 l gear oil Shell Advance EP 80
2 3
. Mount the plug and check the engine for leaks.
!
T
OO LITTLE OIL OR A POOR OIL QUALITY LEAD TO PREMATURE TRANSMISSION WEAR
T ,
HEREFORE ONLY USE BRANDED PRODUCTS
Changing the seat height
The seat height of all 50 mini models can easily be increased by 25 mm (1 in).
The frame is provided with additional fastening points on which the tank
and the tail can be mounted. Thus, you can easily adjust the seat height as
your youngster grows.
CAUTION
.
1
and drain
!
.
19