Procedure 5: Engineering Mode - Spirit XBU75 Service Manual

PROCEDURE 5:
1. Press and hold the START, ENTER, and STOP buttons until display beeps.
2. "ENGINEERING MODE" will scroll across the screen, press ENTER.
3. Press the UP and/or DOWN buttons to scroll through the following sub menus:
- Key Test
- Display Test
- Functions
- Security
- Exit
4. Press ENTER to access the desired menu.
5. Press STOP to exit Engineering Mode.
- Key Test
Press ENTER. Press all buttons on console.
- Display Test
Press ENTER. Console will test each segment or LED. Look to see if there are any
burned out or not working.
- Functions
Sleep Mode On/Off --------------------- Press ENTER to turn on or off.
Pause Mode On/Off -------------------- Press ENTER to turn on or off.
Odometer Reset ------------------------- Press ENTER to reset.
Units English/Metric -------------------- Press ENTER to change.
Beep Sound On/Off --------------------- Press ENTER to turn on or off.
DA Test----------------------------------- Press ENTER to begin the test.
Bike or Elliptical------------------------- Press ENTER to change.
- Security
Child Lock On/Off ------- Press ENTER to turn on or off.
- Exit
Press ENTER to exit Engineering Mode.
Engineering Mode
8