Drain Outlet Kit; Casing Panels (Side); Power Supply And Tariffs; Transport Aid - Viessmann VITOCAL 222-G Technical Manual

Installation accessories

Drain outlet kit

Part no. 7176 014

Casing panels (side)

Vitocal 222-G/333-G
Part no. 7414 924
11

Transport aid

Part no. 7469 270
For use with the split appliance.
Design information

11.1 Power supply and tariffs

According to current Federal tariffs [Germany], the electrical demand
for heat pumps is considered domestic usage. Where heat pumps are
used to heat buildings, the local power supply company must first give
permission [check with your local power supply company].
Check the connection conditions specified by your local power supply
utility for the stated equipment details. It is crucial to establish whether
a mono-mode and/or mono-energetic heat pump operation is feasible
in the supply area.

Application procedure

The following details are required to assess the effect of the heat pump
operation on the grid of your local power supply utility:
■ User address
■ Location where the heat pump is to be used
■ Type of demand in accordance with general tariffs
(domestic, agricultural, commercial, professional and other use)
VIESMANN
48
(cont.)
Vitocal 242-G/343-G
Part no. 7419 881
Drain outlet with siphon and bezel.
■ To seal the gap between the compact heat pump and the wall; 8 cm
wide
■ 4 pce, anthracite
It is also important to obtain information about standing charges and
energy tariffs, about the options for utilising off-peak electricity during
the night and about any power-off periods.
Address any questions relating to these issues to your customer's local
power supply utility.
■ Intended heat pump operating mode
■ Heat pump manufacturer
■ Type of heat pump
■ Connected load in kW (from rated voltage and rated current)
■ Max. starting current in A
■ Max. heat load of the building in kW
VITOCAL