D-Link DSL-2730E User Manual page 88

DSL-2730E User Manual
The following table describes the parameters and buttons of this page.
Field
Host
NumberOfTries
Timeout
Datasize
DSCP
MaxHopCount
Interface
Traceroute
3.4.4.4 ADSL
Choose Maintenance > Diagnostics > ADSL. The page shown in the following
figure appears. It is used for ADSL tone diagnostics.
Enter the destination host address for
diagnosis.
Number of repetitions.
Put in the timeout value.
Packet size.
Differentiated Services Code Point, You should
set a value between 0-63.
Maximum number of routes.
Select the interface.
Click start traceroute.
85
Description