D-Link DSL-2730E User Manual page 35

DSL-2730E User Manual
Field
Mode
SSID
Channel
Number
Radio Power
(Percent)
Show Active
Clients
Channel Width
Control
Sideband
Choose the network model of the modem, which is
varied according to the software. By default, the
network model of the modem is AP.
The service set identification (SSID) is a unique name
to identify the modem in the wireless LAN. Wireless
stations associating to the modem must have the same
SSID. Enter a descriptive name that is used when the
wireless client connecting to the modem.
Choose a channel from the drop-down list box.
A channel is the radio frequency used by 802.11b/g
wireless devices. There are 13 channels (from 1 to 13)
available depending on the geographical area. You
may have a choice of channels (for your region) and
you should use a different channel from an adjacent AP
to reduce the interference. Interference and degrading
performance occurs when radio signal from different
APs overlap.
You can choose the transmission power of the radio
signal. The default one is 100%. It is recommended to
choose the default value100%.
Click it to view the information of the wireless clients
connected to the modem.
Select the appropriate band of 20MHZ or 40MHZ
according to your subscribed broadband service.
Choose the channel selection mode as Upper or
Lower.
Description
32