Introduction; Packing List; Safety Precautions - D-Link DSL-2730E User Manual

DSL-2730E User Manual
1

Introduction

The DSL-2730E supports multiple line modes. With four 10/100 base-T Ethernet
interfaces at the user end, the device provides high-speed ADSL broadband
connection to the Internet or Intranet for high-end users like net bars and office
users. It provides high performance access to the Internet with a downstream
rate of 24 Mbps and an upstream rate of 1 Mbps. It supports IPV6.
The device supports WLAN access, such as WLAN AP or WLAN device, to the
Internet. It complies with specifications of IEEE 802.11, 802.11b/g/n, WEP, WPA,
and WPA2 security. The WLAN of the device supports 1T1R.

1.1 Packing List

1 x DSL-2730E

1 x external splitter

1 x power adapter

1 x telephone cables (RJ-11)

1 x Ethernet cable (RJ-45)

1 x QIG


1.2 Safety Precautions

Take the following instructions to prevent the device from risks and damage
caused by fire or electric power:
Use the type of power marked in the volume label.

Use the power adapter in the product package.

Pay attention to the power load of the outlet or prolonged lines. An

overburden power outlet or damaged lines or plugs may cause electric
shock or fire accidents. Check the power cords regularly. If you find any
damage, replace it at once.
Proper space left for heat dissipation is necessary to avoid damage

caused by overheating to the device. The long and thin holes on the device
are designed for heat dissipation to ensure that the device works normally.
Do not cover these heat dissipation holes.
1