D-Link DSL-2730E User Manual page 76

DSL-2730E User Manual
Field
Enable
Destination
Subnet Mask
Next Hop
Metric
Interface
Add Route
Update
Delete
Selected
Show
Routes
Static Route
Table
Click Show Routes, the page shown in the following figure appears. The table
shows a list of destination routes commonly accessed by your network.
Select it to use static IP routes.
Enter the IP address of the destination device.
Enter the subnet mask of the destination device.
Enter the IP address of the next hop in the IP route to the
destination device.
The metric cost for the destination.
The interface for the specified route.
Click it to add the new static route to the Static Route
Table.
Select a row in the Static Route Table and modify the
parameters. Then click it to save the settings temporarily.
Select a row in the Static Route Table and click it to
delete the row.
Click it, the IP Route Table appears. You can view a list
of destination routes commonly accessed by your
network.
A list of the previously configured static IP routes.
Description
73