Video Codec Settings Tab; Figure 4-8 Video Codec Settings Tab Available Functions; Table 4-3 Video Streaming Resolutions For Hd44Ip - Honeywell NTSC User Manual

IP Camera Web Client

Video Codec Settings Tab

Primary Stream
Default settings shown for NTSC models
Primary Stream Resolutions
H.264
640 x 480 (4:3 aspect ratio)
640 x 360 (16:9 aspect ratio)
320 x 240 (4:3 aspect ratio)
320 x 180 (16:9 aspect ratio)
54
Figure 4-8 Video Codec Settings Tab Available Functions
Set the Resolution
Set the Frame Rate
Set the Priority for Quality or Bit Rate
Set the Compression Ratio
Set the Target Bit Rate
Set the Maximum Bit Rate (kbps)
Set the GOP (Group of Pictures)
Configuring the Compression Settings
1. On the Compression Settings tab, in the Statistics area, select the Received check
box to receive in real time the bit rate and frame rates for the current image.
Deselecting the check box disables the refresh rate.
Note The Received check box is disabled by default. When you log out, this check
box reverts to the disabled state.
2. Use Table 4-4 to set up the streaming resolution and
compression settings.
Table 4-3 Video Streaming Resolutions for HD44IP
H.264
640 x 480 (4:3 aspect ratio)
640 x 360 (16:9 aspect ratio)
320 x 240 (4:3 aspect ratio)
320 x 180 (16:9 aspect ratio)
Secondary Stream
Default settings shown for NTSC models
Table 4-5
Secondary Stream Resolutions
MJPEG
640 x 480 (4:3 aspect ratio)
640 x 360 (16:9 aspect ratio)
320 x 240 (4:3 aspect ratio)
320 x 180 (16:9 aspect ratio)
for the other