Manufacturer's Declaration Of Conformance; North America; Europe; Warranty And Service - Honeywell NTSC User Manual

Manufacturer's Declaration of Conformance

North America

Europe

Warranty and Service

Document 800-09312V2 – Rev A – 08/2012
Performance Series Indoor Day/Night H.264 IP Camera User Guide
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference. For example, try reorienting or relocating the receiving antenna,
increasing the separation between the equipment and receiver, or connecting the
equipment to an outlet on a different circuit.
Caution Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
This Class B digital apparatus complies with Canadian ICES-003.
The equipment supplied with this guide conforms to UL 60950-1 and CSA C22.2 No.
60950-1.
The manufacturer declares that the equipment supplied with this guide is compliant with
the essential protection requirements of the EMC directive 2004/108/EC and the General
Product Safety Directive 2001/95/EC, conforming to the requirements of standards EN
55022 for emissions, EN 55024 for immunity, and EN 60950-1 for Electrical Equipment
safety.
Subject to the terms and conditions listed on the Product warranty, during the warranty
period Honeywell will repair or replace, at its sole option, free of charge, any defective
products returned prepaid.
In the event you have a problem with any Honeywell product, please call Customer
Service at 1.800.796.CCTV for assistance or to request a Return Merchandise
Authorization (RMA) number.
13