Installation Of The Lenticular Screen And Fresnel Lens; Pcb Layout Diagrams - Mitsubishi WS-48315 Service Manual

2. Installation of the Lenticular Screen and Fresnel Lens

Note: Store the Lenticular Screen and Fresnel Lens in a cool dry place. High heat/humidity may
deform the Lenticular Screen and Fresnel Lens.
1. Apply double coated tape (Part # LENS-TAPE) along the top front edge of the Fresnel Lens
as shown in Figure 2-2. Refer to Table A for proper tape length.
2. Place the Fresnel Lens on top of the Lenticular Screen and apply pressure at the top edge to
bond them together as shown in Figure 2-2.
3. Reverse the disassembly procedure for that model to install the screens in the screen frame.
Top
Double Sided Tape
(Part# LENS-TAPE)
Bottom
MODELS: WS-48315 / WS-55315 / WS-65315
Fresnel Lens
( * X ) inch
Lenticular Screen
Model
W S -48315
W S -55315
W S -65315
Top
Bottom
Figure 2-2
Screen Tape
Size Length
48" 41.76
55" 47.85
65" 56.55
Table A
Page 13
Lenticular
Fresnel
Screen
Lens
0.16 inch