D-Link DI-304 User Manual page 67

General Setup
On the General Setup page you can enable/disable the Call Filter or Data Filter and assign
a Start Filter Set for each, configure the log settings, and set the MAC address for
duplicate packets.
♦
Call Filter – Check Enable to activate the Call Filter function. Assign a start
filter set for Call Filter.
♦
Data Filter – Check Enable to activate the Data Filter function. Assign a start
filter set for Data Filter.
♦
Log Flag – For troubleshooting purpose, you need to specify the filter log here.
? None - The log function is inactive.
? Block - All blocked packets will be logged.
? Pass - All passed packets will be logged.
? No Match - The log function will record all packets that are unmatched.
Note: The filter log will be displayed on the Telnet terminal when you type the "log -f"
command.
♦
MAC Address for Packet Duplication – Logged packets may also be
logged to another location via Ethernet. If you want to duplicate logged packets
from the router to another network device, you must enter the MAC address
(HEX Format) of the other devices. Enter "0" to disable the feature. It will be
helpful under Ethernet switch environment.
59
DI-304/DI-304M ISDN Remote Router