Using The Smart Start Wizard - D-Link DI-304 User Manual

DI-304/DI-304M ISDN Remote Router
2. If the IP configuration is correct, you will be able to use the Ping diagnostic utility built in
Microsoft Windows to Ping the router. Click Start → Programs → MS-DOS Prompt.
A command mode window will open. Type ping 192.168.0.1 (default IP of the router) to
diagnose the network connectivity. If both hardware and software are correct, your
computer will receive a response from the router as shown on the next page. If not, verify
that the Ethernet cable is connected to the router properly and the Ethernet port LED on
the front panel is lit.

Using the Smart Start Wizard

The Smart Start Wizard will guide you to the Web Configurator or Telnet Terminal
(command-line based management). Also, if the network you currently installed is not
located in the 192.168.0.x IP range, the wizard will find the router and change the router's
default IP address and IP mask to match the current network.
17