Lan-To-Lan Access; Activating The Dial-In Capability - D-Link DI-304 User Manual

LAN-to-LAN Access

The following sections are based on the network layout above to describe how to set up a
LAN-to-LAN profile to connect two private networks. In the above network layout, the
private network of the head office is 192.168.1.0/24 and the off-site branch office
network is 192.168.2.0/24.
Before you begin to setup a LAN-to-LAN profile for each network, you should gather the
information shown in the following table.
Router IP /Subnet mask
Assigned IP for dial-in
ISDN line number

Activating the Dial-In Capability

In the Quick Setup group of the Setup Main Menu, click Remote Dial-In
♦
Callback Budget (Unit: minutes) – By default, the callback function has a
30-minute time restriction. The budget will be decreased automatically per
callback connection. Once the callback budget has been exhausted, the
callback mechanism will be disabled automatically.
Network ID
connection
Access Account
Callback function
Head Office
192.168.1.0/24
192.168.1/24
192.168.1.200
UN: head; PW: head
1000
Disable
41
DI-304/DI-304M ISDN Remote Router
Branch Office
192.168.2.0/24
192.168.2.1/24
192.168.2.200
UN: branch; PW: branch
2000
Disable