Table of Contents
Advertisement
Component
6
Chapter 2 Getting to know your device
Internal display switch
Internal microphones
Left TouchPad button
Memory card reader
Micro-USB charging port
Mute light
num lock
key
Optical drive
Power button
Power connector
Power light
Description
NOTE:
HDMI refers to an HDMI or micro HDMI port.
Turns off the display and initiates Standby if the display is
closed while the power is on.
NOTE:
The internal display switch is not visible from the
outside of the device.
Record sound.
Functions like the left button on an external mouse.
Reads optional memory cards that store, manage, share, or
access information.
To insert a card:
Hold the card label-side up, with connectors facing the
▲
slot, insert the card into the slot, and then push in on
the card until it is firmly seated.
To remove a card:
Press in on the card it until it pops out.
▲
NOTE:
Memory card refers to an SD or a micro SD
memory card.
Permits you to connect to a wall outlet to charge the battery
or power the device.
CAUTION:
Insert a micro USB adapter with the icon
embossed on the plug facing up. Failure to do so may
damage the charging port.
Amber: Device sound is off.
●
Off: Device sound is on.
●
On select devices with external or attached keyboards, this
key will alternate between the navigational and numeric
functions on the integrated numeric keypad.
Depending on your device, reads an optical disc or reads
and writes to an optical disc.
When the device is off, press the button to turn on the
●
device.
When the device is on, press the button briefly to
●
initiate Sleep.
When the device is in the Sleep state, press the button
●
briefly to exit Sleep.
CAUTION:
Pressing and holding down the power button
results in the loss of unsaved information.
Connects an AC adapter.
Your device may have more than one power light. Each
may display different light conditions, depending on device
behavior.
On: The device is on.
●
Advertisement
Table of Contents
