Valid Storage Period; Update Gps Data - Nikon Coolpix P6000 User Manual

Set Record GPS data
to
On in the GPS menu to change the valid storage period
for recording positional information onto a picture or manually update the
positional information. You can also use the signal transmission from the GPS
satellites to set the date/time of the built-in clock in the camera.
GPS menu
Record GPS data
ON
Valid storage period •
1m
~--
Synchronize
Valid Storage Period
If a picture is shot while positioning cannot be done, the last positional information
will be recorded onto the picture. As a result, a margin of error will occur between
the shooting location and the recorded positional information.
Set Valid storage period to reduce the margin of error with the shooting location.
Choose the valid storage period from 15 seconds or less, 30 seconds or less, 1
minute or less (default setting), 5 minutes or less, 15 minutes or less, 30
minutes or less, 60 minutes or less, or 2 hours or less.
If positioning cannot be done after the valid storage period has ended, the
positional information will not be recorded onto the picture.
Update GPS Data
Positioning is updated automatically, but Update GPS data can be used to update
manually.
1
Use the multi selector to choose
Update
GPS
data from the GPS menu, and press the
®
button.
c
VI
2
Choose Yes and press the
®
button.
• Updating of positional information begins.
• When the updating is complete, Update complete is
displayed on the screen and the monitor display returns
to the GPS menu.
• To cancel the update operation, choose No,
63