Nikon Coolpix P6000 User Manual page 204

If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service representative.
Refer to the page numbers in the right-most column for more information.
Display, Settings and Power Supply
z
o
~
I' D
Vl
790
Problem Cause/Solution !I!
• Camera is off. 17
• Battery is low. 24
• Standby mode for saving power. Press the shutter-release 17,28
Monitor is blank.
button halfway.
• Monitor is turned off. Press the
101
button to turn it on.
14
• Camera and computer are connected via USB cable. 91
• Camera and TV are connected via audiolvideo cable.
90
• Time lapse or interval timer photography in progress. 82,142
• Ambient lighting too bright. Use the viewfinder or move 26
to a darker location.
Monitor is hard to
•
Adjust monitor brightness. 165
read.
•
Monitor is dirty. Clean monitor. 182
• Monitor has dimmed to save power. Monitor brightens 17
when controls are used.
•
Battery is low.
24
Camera turns off • Camera has turned off automatically to save power as no 17
without warning. operations have been performed for some time.
• Battery is cold.
183
- -
• If the date has not been set ("Date not set" indicator blinks 20,64,162
during shooting) pictures will have a time stamp of "00/
00/000000:00"; and movies and voice recordings will be
Date and time of dated "01.01.0800:00:' Set the correct date and time using
recording are not
Date
in the setup menu or
Synchronize
in the GPS
correct. menu.
•
The camera clock is not as accurate as a normal clock. 162
Checking the camera clock against normal clocks
regularly is recommended.
No indicators
Shooting data and photo information may be hidden. Press
displayed in the
101
button until shooting data or photo information will
14
monitor. be displayed.
Date imprint not
Date
h.:ls not been set.
20,162
available.