Access Sim Card Data - HP MSR930 Configuration Manual

Configuration guide | HP MSR930 Verizon 4G-LTE/3G Router Series

Access SIM card data

Use the display cellular-Ethernet 1/0 all command within the cellular-Ethernet
interface. If the account is not activated, you can use this information to give
to Verizon. Information in bold is what the carrier would require.
Interface cellular-Ethernet 1/0
[MSR930-Cellular-Ethernet1/0] dis cellular-ethernet 1/0 all Modem State:
Hardware Information
====================
Model = MC7750
Manufacturer = Sierra Wireless, Incorporated
Modem Firmware Version = SWI9600M_03.05.10.09ap r5700 carmd-en-10527 2013/03/12
10:37:48
Modem Boot Version = SWI9600M_03.05.10.09bt r5700 carmd-en-10527 2013/03/12
10:35:44
PRI Version = 9901456 00.01
Electronic Serial Number (ESN) = 80E0E353
Preferred Roaming List (PRL) Version = 0
International Mobile Equipment Identity (IMEI) = 990000561093016
International Mobile Subscriber Identity (IMSI) = 311480012153505
Mobile Equipment Identifier (MEID) = 99000056109301
Hardware Version = 10
Modem Status = Online
Profile Information
====================
Profile index = 1
PDP Type = IPv6, Header Compression = OFF
Data Compression = OFF
Access Point Name (APN) = vzwims
Authentication = NONE
Username =
Profile index = 2
PDP Type = IPv4v6, Header Compression = OFF
Data Compression = OFF
Access Point Name (APN) = vzwadmin
Authentication = NONE
Username =
8