Maintain A Permanent Connection Via 4G-Lte/3G Interface - HP MSR930 Configuration Manual

Configuration guide | HP MSR930 Verizon 4G-LTE/3G Router Series
LTE related info
------------------
Current RSSI = -61 dBm
Current RSRQ = -9 dB
Current RSRP = -89 dBm
Current SNR = 9 dB
Tx Power = -3276 dBm
Active Band = E-UTRA Operating Band 13
Modem Security Information
====================
PIN Verification = Disabled
PIN Status = PIN Requirement Disabled
Number of PIN Retries Remaining = 0
Number of PUK Retries Remaining = 0
UIM Status = OK
Route all traffic to the 4G-LTE/3G interface:
ip route-static 0.0.0.0 0.0.0.0 Cellular-Ethernet1/0
Configure a dialer rule:
•
dialer-rule 1 ip permit
Configure DHCP:
•
dhcp server ip-pool test
network x.x.x.x mask 255.255.255.0
gateway-list x.x.x.x
dns-list x.x.x.x dhcp enable
Configure DNS:
•
dns resolve
dns proxy enable

Maintain a permanent connection via 4G-LTE/3G interface

To maintain a permanent connection through the 4G-LTE/3G interface, use the NQA function to send packets periodically on
the link:
nqa entry admin 4g type icmp-echo data-size 56
description keep-4g-interface-active (Google™) destination ip 74.125.227.196
frequency 60000 quit
nqa schedule admin 4g start-time now lifetime forever
Now the Cellular-Ethernet1/0 interface will remain connected as long as the NQA schedule is active.
11