Assembly - Weslo PRO 11.0x WLEX31810.0 User Manual

ASSEMBLY

To hire an authorized service technician to assemble the exercise bike, call 1-800-445-2480.
Assembly requires two persons. Place all parts of the exercise bike in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed. In addition to the included
tools, assembly requires a Phillips screwdriver and an adjustable wrench .
As you assemble the exercise bike, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number
following the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check
to see if it has been preassembled. To avoid breaking parts, do not use power tools for assembly.
M6 Washer M8 Split M6 Locknut M8 Locknut M10 Locknut M4 x 16mm
(55)–8 Washer (59)–5 (27)–4 (60)–4 (63)–4 Screw (52)–4
M6 x 38mm Patch M6 x 38mm Button M6 x 42mm Button
Screw (48)–4 Bolt (69)–4 Screw (49)–4
M8 x 25mm Button M8 x 70mm Button
Screw (33)–3 Bolt (54)–2
M10 x 75mm Carriage Bolt (51)–4
5