Weslo PRO 11.0x WLEX31810.0 User Manual page 9

8. Identify the Left Pulse Bar (65), which is marked
with a "Left" sticker.
Have a second person hold the Left Pulse Bar
(65) near the left side of the Upright (13).
Insert the left Pulse Wire (71) into the Upright
(13) and pull it upward out of the top of the
Upright.
Tip: Do not pinch the wires. Slide the Left
Pulse Bar (65) onto the Upright (13). Attach the
Left Pulse Bar with two M6 x 38mm Button
Bolts (69) and two M6 Locknuts (27). Make
sure that the Locknuts are in the hexagonal
holes.
Repeat this step for the Right Pulse Bar (66).
9. While a second person holds the Console (16)
near the Upright (13), connect the wires on the
Console to the Upper Wire (36) and to the
Pulse Wires (71).
Insert the excess wire downward into the
Upright (13) or upward into the Console (16).
Tip: Avoid pinching the wires. Attach the
Console (16) to the Upright (13) with four M4 x
16mm Screws (52).
8
Avoid pinching
the wires
69
71
65
Hexagonal
Holes
27
9
52
13
Avoid pinching
the wires
9
71
66
13
16
36
71