Table of Contents
Advertisement
ASSEMBLY
b To hire an authorized service technician to
assemble this product, call 1-800-445-2480.
b Assembly requires two persons.
b Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you nish all assembly steps.
b Left parts are marked dLe or dLefte and right parts
are marked dRe or dRight.e
1. Turn the Rear Stabilizer (2) so that the slot faces
downward, and insert the Rear Stabilizer into the
Frame (1). Attach the Rear Stabilizer with four
M6 x 10mm Machine Screws (56).
2. Turn the Front Stabilizer (5) so that the square
holes are facing away from the saddle bracket
on the Frame (1). Attach the Front Stabilizer with
two M8 x 40mm Carriage Bolts (18), two M8
Curved Washers (14), and two M8 Locknuts (9).
b In addition to the included tool(s), assembly
requires the following tools:
one Phillips screwdriver
one adjustable wrench
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
1
2
2
9
1
5
56
1
Slot
14
5
Square
Holes
18
Advertisement
Table of Contents
