Adjustment - JVC LT-26C31BJE Service Manual

4.1 ADJUSTMENT PREPARATION
(1) Prior to the following procedure, be sure to connect the
receiver unit and the display unit.
(2) Adjustment of many Majority of the adjustment items for
this unit is performed using the remote control.
(3) However, adjustment of some adjustment items is
performed in the conventional way, i.e. with components
on the boards.
(4) Ensure that the power supply is AC220V.
(5) Allow the set and the measuring devices to run for at least
30 minutes.
(6) Do not alter settings of items/preset values on the service
screen that are not stated in this manual.
(7) Unless otherwise
PROCEDURE" section, follow the settings for the features
stated below using the remote control.
Setting item
PICTURE MODE
PICTURE adjustment
COLOUR TEMP.
DIGITAL VNR
Super Digi Pure
SOUND adjustment
BBE
AHS
AHB
ZOOM
1-20 (No.YA014)

ADJUSTMENT

stated in the "ADJUSTMENT
Settings
STANDARD
All center (00)
NORMAL
MIN
AUTO
All center (00)
OFF
OFF
OFF
FULL
SECTION 4
4.2 MEASURING INSTRUMENT AND FIXTURES
• DC voltmeter (or Digital voltmeter)
• Oscilloscope
• Signal generator (Pattern generator)
• Remote control unit