JVC LT-26C31BJE Service Manual page 13

3.1.6 REMOVING THE VIDEO PWB (Fig.3-1-6)
• Remove the STAND ASS'Y.
• Remove the REAR COVER.
(1) Remove the 2 screws [N] and 1 screws [P], then remove
the JACK BASE.
(2) Remove the 4 screws [Q], and remove the VIDEO PWB.
(3) Remove the 2 screws [R], and remove the TUNER PWB
BASE.
(4) Remove the 4 screws [S], and remove the TUNER PWB
and MSP PWB.
3.1.7 REMOVING THE MI-COM & DIST PWB (Fig.3-1-7)
• Remove the STAND ASS'Y.
• Remove the REAR COVER.
(1) Remove the 7 screws [T], and remove the VIDEO PWB
BRACKET.
(2) Remove the 4 screws [U], and remove the MI-COM & DIST
PWB from VIDEO PWB BRACKET.
3.1.8 REMOVING THE POWER PWB (Fig.3-1-8)
• Remove the STAND ASS'Y.
• Remove the REAR COVER.
• Remove the FUN BRACKET.
• Remove the POWER CORD.
• Remove the VIDEO PWB.
(1) Remove the 4 screws [X], and remove the AV JACK
BRACKET.
(2) Remove the 6 screws [Y], and remove the POWER PWB.
(3) Remove the 6 screws [Z], and remove the POWER PWB
BASE.
Q
VIDEO PWB
X
Fig.3-1-6
MI-COM&DIST PWB
T
U
Fig.3-1-7
Y
P Q
AV JACK
BRACKET
X
Fig.3-1-8
JACK BASE
N
P
TUNER PWB
MSP PWB
S
R
TUNER PWB
BASE
VIDEO PWB BRACKET
T
Y
POWER PWB
Z
POWER PWB
BASE
Z
(No.YA014)1-13