Setting Up Dlna - Samsung HT-J4500 User Manual

Settings
Unzip the zip archive to your computer. You
8.
should have a single folder with the same name
as the zip file.
Copy the folder to a USB flash drive.
9.
10. Make sure no disc is inserted in the product,
and then insert the USB flash drive into the USB
port of the product.
11. In the product's menu, go to Settings > Support
> Software Upgrade.
12. Select By USB.
13. The home theater searches for the software on
the USB drive. When it finds the software, the
Update Request pop-up appears.
14. Select OK. The home theater turns off, turns
on, and then begins the upgrade. When the
upgrade is done, the home theater turns off.
15. Press the button to turn on the home
POWER
theater.
There should be no disc in the product when
✎
you upgrade the software using the USB Host
jack.
When the software upgrade is done, check
✎
the software details in the Software Upgrade
menu.
Auto Upgrade Notification
If your product is connected to the network and you
set Auto Upgrade Notification on, the product will
notify you if a new software version is available with
a pop-up message.
Turn on the product.
1.
In the Software Upgrade menu, set Auto
2.
Upgrade Notification to On.
If there is a new software version available, the
product will notify you with a pop-up message.
To upgrade the firmware, select Yes. The
3.
product turns off automatically, turns on, and
then begins the upgrade.
The update progress popup will appear. When
4.
the update is complete, the product will turn
off automatically again.
Press the button to turn on the
5. POWER
product.

Setting Up DLNA

DLNA lets you play music, video, and photo files
stored in your PC through your home theater.
To use DLNA, you must install DLNA software or
already have DLNA software installed on your PC
and connect the home theater to your PC via your
network (See page 10).
PCs running Windows 7 and Windows 8 have
✎
DLNA software (Play To) built in.
20
- English