Having code numbers
displayed
A code number which has been
forgotten or located during the
automatic search may be displayed.
Press the button for the device
whose code number you would
like to display.
Press the "SET" button and
numerical key "1" and hold both
of these down.
The LED lights up a certain number
of times, corresponding to the value
of the first digit of the code number.
If the LED does not flash, the first
digit is a zero; if it flashes once, it is
a one, etc.
Release the buttons.
Press the "SET" button and
numerical key "2" and hold both
of these down.
The LED lights up a certain number
of times, corresponding to the value
of the second digit of the code
number.
Release the buttons.
Press the "SET" button and
numerical key "3" and hold both
of these down.
The LED lights up a certain number
of times, corresponding to the value
of the third digit of the code number.
Release the buttons.
Information
The code numbers can be noted
on the rear of the remote control.
Setting the remote control
Blocking the device button
Changes can be prevented by
blocking the device button.
Press the "SET" button and hold
this down.
Press the device button which
you would like to block.
The LED lights up continuously.
Release both buttons.
Enter the number "911" using
the numerical keys.
The LED is extinguished and the
device button is blocked for
changes.
Unblocking a device button
Press the "SET" button and hold
this down.
Press the device button which
you would like to unblock.
The LED lights up continuously.
Release both buttons.
Enter the number "912" using
the numerical keys.
The LED is extinguished and the
device button is unblocked.
27