Table of Contents
Advertisement
2.
Press and release the + key to select radio-controlled time ON or OFF.
3.
Press and release the SET key to confirm the radio-controlled time setting and continue to
the Language setting.
Note: Turn off the radio-controlled time feature only if you DO NOT want the clock to
automatically update itself.
LANGUAGE SETTING
The weekdays can be displayed in LCD2 with the pre-set languages: US English (ENG), French
(FRA) and Spanish (ESP).
1.
LAN will be displayed in the lower LCD along with one of the three letter language
abbreviations.
2.
Press and release the + key to select the desired language.
3.
Press and release the SET key to confirm the language setting and enter the Manual Time
setting mode.
MANUAL TIME SETTING
In case the atomic clock is not able to detect the WWVB-signal (disturbances, transmitting
distance, etc.), the time can be manually set. The clock will then work as a normal Quartz clock.
1.
The hour digits will start flashing in the upper LCD.
2.
Select the desired hours by pressing and releasing the + key.
3.
Press and release the SET key to advance to the minutes setting.
4.
Now the minute digits will start flashing.
5.
Select the desired minutes by pressing and releasing the + key. If the + key is held, the units
will increase by 5.
6
Advertisement
Table of Contents
