Bissell PROHEAT 2X User Manual page 12

Operations
Hard floor cleaning
(Select models only)
Your PROheat 2X model may have come with
a hard floor attachment and 2X Hard Floor
Solutions Formula. If not, these products
are available for purchase by contacting the
BISSELL Consumer Care department by phone
or at the website. The hard floor tool provides
effective cleaning for linoleum, vinyl, and
tile floors. Caution: Do not use on unsealed
hardwood floors.
1. Vacuum or sweep thoroughly to pick up any
loose debris and pet hair.
2. Move any furniture, if needed.
3. Fill the formula tank to "WATER" line with
water. Fill to "FORMULA" line with BISSELL 2X
Hard Floor Solutions.
4. Fill the 2-in-1 water tank with hot tap water
(140°F/60°C MAX) and set aside.
5. Attach the hard floor tool onto the bottom of
the machine by hooking it into the nozzle and
swinging it down until it clicks into place.
6. Set ReadyTools dial to the "FLOOR
CLEANING" setting.
7. Set the Custom Clean dial to NORMAL clean.
8. Plug into an outlet and turn the power switch
and heater ON ( I ).
9. Slowly move the machine forward and
back over hard floor surface one time while
depressing trigger. Caution: Do not overwet.
10. Repeat the motion without pressing the
trigger using the hard floor tool to squeegee
and suction up the dirty water.
11. Allow adequate time for floors to dry.
12. Remove hard floor tool, rinse and dry
before storing.
13. Rinse out the formula tank.
www.BISSELL.com
12
800.237.7691
WARNING
To reduce the risk of fire and electric shock- when
cleaning a hard floor, the BISSELL hard floor tool
203-5642 must be used and it must only be used with
BISSELL 2X Hard Floor Solutions cleaning fluid intended
for use with this appliance.
5.