Stain Removal - Bissell PROHEAT 2X User Manual

Operations
5. To empty the Stain Trapper tool, rotate
5.
the small tank on the bottom of the tool
to unlock it.
NOTE: Be careful to keep the top of the tool
facing upward or soiled water will spill out of
the tank.
6. Dump dirty water into a sink or toilet and
rinse the tank out with clean water. Replace
the tank by lining up the "unlock" symbol with
7.
the small arrow on the tank and turning it to
the "lock" symbol.
7. Clean the front of the tool by removing the
plate over the suction path. Pull down on the
bottom of the plate to remove. Run the tool
and the plate under clean water to rinse taking
care to remove all debris. Replace the front
plate by sliding it back into place.

Stain removal

Do Not Delay! Attending to an accident soon
after it occurs ensures the most optimal clean.
Leaving it for an extended period of time may
cause it to set and become permanent.
1. Blot up liquids with an absorbent cloth or
paper towels. White materials are recommended
because certain dyes may bleed and make the
stain worse.
2. Gently scrape up any semi-solids with a spoon
or spatula. Do not use a knife or other utensil
with sharp edges because it could damage the
carpet or upholstery.
3. If the area has already dried, separate and
remove from the carpet whatever semi-solids
and residue that can be accessed before deep
cleaning.
4. Be sure to test any spot removal formulas in
an inconspicuous area first. This is important as
some dyes and materials could be damaged or
discolored by cleaning solvents. If such a change
should occur, try a different solution or call a
professional.
5. If cleaning on Berber carpeting, gently run
your machine over a hidden area.
If no fuzzing occurs, continue cleaning
in soiled area.
6. Using the BISSELL Stain PreTreat, spray
evenly over soiled area. Do not overwet. Wait
3-5 minutes. Gently work the solution by blotting
area with a clean, damp, color safe cloth.
7. Clean using either the FLOOR CLEANING, or
TOOLS setting on the ReadyTools dial.
www.BISSELL.com 800.237.7691
11