Deep Reach Tool Attachment; Cleaning With Stain Trapper Tool - Bissell PROHEAT 2X User Manual

Operations
6. Clean by pressing the trigger to spray solution
onto the area to be cleaned. Slowly move the tool
back and forth over the soiled surface. Release
the trigger to suction soiled water. Continue to
clean in the area, working in small sections, until
no more dirt can be removed. Rinse (optional)
and suction as needed. Caution: Do no overwet.
7. Remove and rinse tools in clean, running
water. Dry and replace in the tool caddy.
8. It is recommended that you suction clean
water from a bowl to rinse out the hose.
9. Before replacing lift end of hose and stretch
out to ensure all water is cleared from hose.
10. Wrap flex hose around the tool caddy.
11. Empty 2-in-1 water tank and rinse out,
following the instructions on page 8.
12. Return ReadyTools dial to floor setting.

Deep Reach Tool attachment

(Select models only)
1. Follow instructions 1-5 on page 9 under
"Cleaning with attachments".
2. Set tool on stain and press the trigger to spray
solution onto the area to be cleaned.
3. Slowly move the tool back and forth over the
soiled surface, keeping the tool in contact with
the carpet.
4. Release trigger and move tool slowly over the
soiled area to suction up water and dirt.
5. Continue to clean the area, working in small
sections, until no more dirt can be removed.
6. Remove tool from hose when finished. Clean
under warm water before storing.
Cleaning with the Stain Trapper Tool
(Select models only)
1. Follow steps 1-5 on page 9.
2. Gently scrape up any semi-solids with a spoon
or spatula. Do not use a knife or other utensil
with sharp edges because it could damage the
carpet or upholstery.
3. Plug in and turn on the power switch.
4. Clean by pressing the trigger to spray solu-
tion onto the area to be cleaned. Slowly move
the tool back and forth over the soiled surface.
Release the trigger to suction soiled water.
Continue to clean in the area, working in small
sections, until no more dirt can be removed.
Rinse (optional) and suction as needed.
CAUTION: Do not overwet.
NOTE: Do not fill the Stain Trapper tank
above the FULL line.
www.BISSELL.com
10
800.237.7691
9.
2.
4.
6.