Related Manuals for Bissell 2066F
Summary of Contents for Bissell 2066F
- Page 1 PROHEAT 2X REVOLUTION PET Carpet & Upholstery Deep Cleaner _______________ USER GUIDE 2066F www.BISSELL.com...
-
Page 2: Safety Instructions
» Do not immerse in water or liquid. Use only on surfaces moistened by the cleaning process. capabilities or lack of experience and » Use only BISSELL cleaning products intended for use with knowledge if they have been given this machine. -
Page 3: Table Of Contents
Thanks for buying a BISSELL deep cleaner! We love to clean and we’re excited to share one of our innovative products with you. We want to make sure your deep cleaner works as well as it does today for years to come, so this guide has tips on using (pages 7-13), maintaining (pages 13-17), and if there is a problem, troubleshooting (page 18). - Page 4 Switch Spray Trigger Rubber Easy Fill/ Formula Cap CleanShot® Quick Button Release™ Cord Wrap Clean Water Tank (1 Gallon Capacity) Recline Pedal EdgeSweep® Power Brushes Button Float Dirty Water Tank Stack Foot Belt Access Door Belt/Brush Access Plate Nozzle www.BISSELL.com...
-
Page 5: Assembly
Using a Phillips screwdriver, Wrap the cord around clean water tank with secure the carry handle with the carry handle and quick the grooves and slide the screw that’s taped to the release hook. the tank into place. upper handle. www.BISSELL.com... -
Page 6: Cleaning Formulas
Protector Protector ONLY BISSELL Wash & Protect formulas protect from future stains with Scotchgard™ Protector. Scotchgard™ is a trademark of 3M®. *60 mL of 2X concentrated formula is equivalent to 120 mL of non-concentrated formula. Tips Before Carpet Cleaning •... - Page 7 BISSELL solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN MICROWAVE. • When using BISSELL Wash & Remove + Antibacterial formula: Only fill your clean water tank with the recommended amount of water and formula to achieve anti-bacterial benefits.
- Page 8 Pour in more power with BISSELL Oxy Boost • Fill tank with water and 2X formula (Step 3 above). • Add 60 mL of BISSELL Oxy Boost per 3.7 L of water. • The ProHeat 2X Revolution Pet has a 3.7 L clean water tank.
-
Page 9: Cleaning Mode
1 hour of dry time. Press the power button to turn the machine on. *Choose “Deep To recline your machine Clean” mode and use BISSELL for use, press the recline Plug into a properly Wash & Remove + Antibacterial to pedal with your foot. -
Page 10: After Cleaning
When the carpet feels dry to the touch, to be followed exactly. return furniture that was removed. To be sure to avoid staining, place wax paper or aluminum foil under the legs. Wait at least another three hours before removing wax paper or foil. www.BISSELL.com... - Page 11 Let the hose and tool air dry before storing. NOTE: Regularly clean high-traffic area rugs in Express Clean mode to remove the forgotten dirt. NOTICE: Tipping the machine when using the hose and tool may cause carpet damage. www.BISSELL.com...
- Page 12 WET MODE NOTE: Start from the area farthest away. Hold the trigger down, and pull the tool toward you. Keep the tool in contact with the surface as you pull. You will see extraction through the nozzle. www.BISSELL.com...
-
Page 13: Troubleshooting
WARNING: To reduce the risk of fire and electric shock when cleaning a hard floor, the BISSELL Bare Floor Tool must be used, and is only to be used with BISSELL Wash & Shine Hard Floor formula intended for use with this appliance. - Page 14 Release Wipe your machine’s the spray trigger and suck exterior with a soft cloth. up the water. Twist cap back on tightly. www.BISSELL.com...
- Page 15 NOTICE: To reduce the risk of a leaking condition, do not store unit where freezing may occur. Damage to internal components may result. www.BISSELL.com...
- Page 16 Lay the machine back down on its back. If the Gear Belt is broken, gently Use a Phillips-head screwdriver to remove remove it. If you are replacing your the screw on the brushroll end cap. brush rolls, gently remove the belt. www.BISSELL.com...
- Page 17 You will here a click from each “push” button when the cover is pushed down into place. Line up the nozzle from the edge near the floor and rotate to snap back into place. www.BISSELL.com...
-
Page 18: Troubleshooting
2. With the cap twisted ON tightly, hold your tank at an angle, over a tank and the tank’s handle sink or drain, so any extra water can pour out of the space 3. Wipe the tank dry with a cloth www.BISSELL.com... - Page 19 Notes www.BISSELL.com...
-
Page 20: Service
Limited 2 Year Guarantee INCURRED IN MAKING A CLAIM UNDER THIS GUARANTEE PLEASE (from the date of purchase by PROVIDE BISSELL WITH A COPY OF THE RECEIPT OF THE EXPENSES BY original purchaser) EMAIL OR POST. Subject to the *CONDITIONS identified below, BISSELL will repair or...