A.3.4
PT-300 Face-up Output Tray
Use the face-up output tray when you wish paper to be stacked with the printed side facing
up (reverse order), or when you are printing on envelopes, postcards, transparencies, or
thick paper.
1
Install the paper stopper according to the size of paper to be used.
Figure A-11
2
Install the face-up output tray on the rear of the printer.
When installing directly to the printer
If a duplexer has been installed to the
printer
Figure A-12
Legal Size
A4 Size
Letter Size
Paper Stopper
A-9
PT-300 Face-up Output Tray
Face-up Output Tray
(PT-300)
Face-up Output Tray
(PT-300)