Interface Connectors; Safety Information - Kyocera FS-1700 User Manual

Conforming to the Class B limits
EF-1 Envelope Feeder
DU-20 Duplexer
HS-20 Paper Handler/Stacker
PF-20 Paper Feeder
PF-20mini Paper Feeder
SO-6 Sorter/Stacker
ST-20 Bulk Paper Stacker

Interface connectors

Important note on the interface connectors
Be sure to turn off printer power before connecting or disconnecting an interface cable to the
printer. For protection against static discharge which may be applied to the printer's internal elec-
tronics through the interface connector(s), keep any interface connector which is not in use
capped using the protective cap supplied.
Use shielded interface cable.

Safety information

Laser safety
This printer is certified as a Class 1 laser product under the U.S. Department of Health and Human
Services (DHHS) Radiation Performance Standard according to Radiation Control for Health and
Safety Act of 1968. This means that the printer does not produce hazardous laser radiation. Since
radiation emitted inside the printer is completely confined within protective housings and external
covers, the laser beam cannot escape from the printer during any phase of user operation.
Introduction
v