D-Link DSL-2640U User Manual page 84

Wireless n 150 adsl2+ modem router
Hide thumbs Also See for DSL-2640U:
Table of Contents

Advertisement

DSL-2640U Wireless N 150 ADSL2+ Modem Router
User Manual
Parameter
MTU
MAC
(The
VLAN
section for this connection type can be used if the
selected from the
Allow to create several
connections assigned
to this port
Use VLAN
VLAN ID
VLAN priority
Ethernet
The maximum size of units transmitted by the interface.
A MAC address assigned to the interface. This parameter is
mandatory if your ISP uses MAC address binding. In the field, enter
the MAC address registered by your ISP upon concluding the
agreement.
Also you can set the address of a device connected to the router's
LAN at the moment. To do this, select the relevant value from the
drop-down list (the field will be filled in automatically).
Ethernet WAN type
grouping / Make WAN
If the checkbox is selected, the router is able to use several untagged
connections.
If the checkbox selected, the router is able to use tagged VLAN
connections.
An identifier for the VLAN. The field is displayed when the Use
VLAN checkbox is selected.
A priority tag for the type of traffic transmitted. The field is
displayed when the Use VLAN checkbox is selected.
Page 84 of 149
Description
VLAN
drop-down list on the
page.)
Configuring via Web-based Interface
VLAN MUX Mode
value is
Advanced / Interface

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents